Acer Aspire X1300 Información técnica descargar pdf (Pagina 34)

26 Chapter 2

PnP/PCI Configurations

Parameter Description Option

Reset Configuration Data If enabled, the system is forced to update Extended System

Configuration Data (ESCD) and then is automatically set to the

disabled mode.

If disabled, the system ESCD will update only when the new

configuration varies from the last one.

Disabled

Enabled

Resources Controlled By When set to auto ESCD, the system BIOS will detect the system

resources and automatically assign the relative IRQ and DMA channel

for each peripheral.

When set to manual, you have to assign the IRQ and DMA for add-on

cards.

Auto ESCD

Manual

IRQ Resources This parameter can be configured if the Resources Controlled By is set

to Manual.

It allows you to assign each system interrupt a type, depending on the

type of device using the interrupt.

IRQ-5

IRQ-7, IRQ-9,

IRQ-10, IRQ-11,

IRQ-14

PCI/VGA Palette Snoop Enables or disables the system graphic card to allow VGA palette

snooping.

Disabled

Enabled

Maximum Payload Size Set the maximum payload size for Transaction packets (TLP). 4096

128, 256, 512, 1024

2048

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 99 100

Sin comentarios

Acer Aspire X1300 Información técnica Pagina 34