Acer ALH-616ds Manual de usuario descargar pdf (Pagina 22)

This chapter describes the network topology for hybrid 10Mbps and 100Mbps

networks, cabling requirement for connections, the interoperability between

hubs and switches and the function of bridge Up-Link port. Please turn over

the page to see the different Topologies.

3.1 Network topology for AcerHub ALH-616ds : The factors for ALH-616ds

dual-speed network implementation are:

• For stand-alone one, the ALH-616ds consists of separate 10Mbps and

100Mbps network domains with one built-in switch to inter-connect the

data in domains, as shown in Figure 3-1.

3. Building Feasible Networks

Figure 3-1 Separate domains in ALH-616ds.

• The hub will be divided into Master and Slave hubs when they are stacked

together. The upper most hub is the Master hub, and other hubs are Slave

hubs. The Master hub continues to use the built-in switch but the switch

in the Slave hubs will be disabled. The Slave hubs will provide a uplink port

with bridge functional(so called Bridge Uplink Port) that utilizes the first

connection port as well, as in Figure 3-2.

616ds

3-1

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

Sin comentarios

Acer ALH-616ds Manual de usuario Pagina 22