Acer Altos G330 MK2 Manual de usuario Pagina 54

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 125
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 53
3 System upgrade
36
To remove an easy-swap hard drive:
1 Remove the side panel from the chassis.
Go to page 31 for instructions.
2 Disconnect the data and power cables from their HDD connectors.
The figure below shows the cable connections for a SAS HDD
connected to an optional SAS/SAS RAID expansion card. Easy-swap
HDD configuration also supports SATA HDDs connected to the
onboard SATA connectors.
3 Press the hard disk carrier button to release the ejector lever.
4 Use the ejector lever to pull the drive out of the cage.
Make sure to support the drive when pulling it out of the cage.
5 Observe the post-installation instructions described on page 30.
Vista de pagina 53
1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 124 125

Comentarios a estos manuales

Sin comentarios