Acer Network Device Altos R520 Manual de usuario Pagina 145

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 184
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 144
135
Make sure the memory modules have been populated according
to the system requirements.
External device connected to a USB connector does not work.
Do the following:
Reduce the number of external devices connected to a USB hub.
Refer to the documentation that came with the device.
Server cannot connect to a network
Make sure the network cable is securely attached to the correct
connector at the system rear panel.
Try a different network cable.
Make sure you are using the correct and the current drivers.
Make sure the driver is loaded and the protocols are bound.
Problems with the network
Network status indicator does not light.
Do the following:
Check the cabling and network equipment to make sure that all
cables are properly connected.
Reinstall the network drivers.
Try another port or hub on the switch.
Diagnostics pass but the connection fails.
Make sure the network cable is securely attached.
Vista de pagina 144
1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 183 184

Comentarios a estos manuales

Sin comentarios